Meridian 400 SLD Скачать руководство пользователя страница 37

Страница: 37 / 84

7.3 OPERATION
7.3.1

Loading (Filling the Seed Tender)

This Operation section provides a step-by-step

procedure for first loading seed into the seed

tender using the conveyor at the farm and then

unloading it in the field.

1. Before loading seed, make sure the two slide

gates are in the closed position.

2. Open the roll-up tarp.

3. The seed compartments can be loaded from

a storage box, storage bag, or other means

directly into the seed tender. If these loading

methods are not available, continue with this

procedure.

4. Remove the lock pin from the road transport or

field transport location. Store the pin in a safe

location.

5. Remove the protective cover from the seed

pan.

6. Remove the two retainer lock pins and store

them in a safe location.

7. Turn key switch (1) to the ON position.

Содержание 400 SLD





















































































Результаты поиска

Содержание 400 SLD

Отзывы:

Похожие инструкции для 400 SLD

Бренды по названию

Популярные бренды

Meridian 400 SLD, Руководство оператора

Результаты поиска

Содержание 400 SLD

Отзывы:

Похожие инструкции для 400 SLD

Бренды по названию

Популярные бренды