Merging VCube, Руководство пользователя

Страница: 61 / 291

Recording and Acquisition : Recording Page 61
Record Settings Tab
Enable When checked recording is possible using the settings in the rest of the Tab.
Note: The Enable button must be disabled (unchecked) in order to see captured Media in the
Timeline.
Auto Edit When lit, Auto Edit Mode is active. This enables VCube to automatically control a VCR via
the Sony 9 Pin (P2) protocol, and to record a range of the video tape from In point to Out
point set in the Transport Tool -
User Interface > Toggle Transport Tool [ T ]. Please see
also: Transport Tool on page 56
Note: During this process, VCube needs to be in chase mode. To bypass possible drop outs in the
Reference TimeCode source, Soft Chase Mode can be selected in Formats & Sync . In this case
the Video Card MUST be referenced to an external reference signal.
ASMBL Click on the AS se MBL e button to use VCube’s Assemble edit mode. Please
see: Assemble (ASMBL) on page 59
Analog - Xena LHi 0 This section shows the Audio Hardware currently selected for recording. The number of
record channels available will vary accordingly to a maximum of 8.
Insert V1 Click on the V1 button to arm Video for recording in Insert mode. When lit (as above)
Video is armed for recording. Please see: Insert (INSERT) on page 60
12345678 Click on the numbered buttons to arm Audio Channels for recording in Insert mode.
Here, Channels 1 & 2 are armed. The number of Audio Channels available will depend on
the hardware. Multiple Audio Channels appear as Layers in a single Audio Track. Level
meters are above each arming button.
After Capture The field shows what will be done with the recorded material after capture. Options are
None and In Current Composition, Place Clips at Original Timecode. If None is selected
the recorded fields are simply added to the Output folder. If the in Current Composition ...
option is selected and no Track is selected in the Timeline, a new Track or Tracks will be
created.
Output
Output Path The field shows the current Output Path. Click on the ... button to open a Windows
browser to change the path. The Path defaults to the current Composition Media Files
Path.
File Name The field shows the Current root File Name Click in the field and type to enter a new File
Name.
Counter Field shows the start number for the incrementation process. Click in the field and type to
enter a different start number.
Record Settings
Record Settings Tab page