Merging VCube, Руководство пользователя

Страница: 60 / 291

Recording and Acquisition : Recording Page 60
• When ASMBL is selected any active Track Arming buttons are switched off. Recording takes place on the
Video and all available Audio Tracks. If a Track Arming button is switched on while in ASMBL mode ASMBL
mode is disabled.
• Chase is set Automatically when the Auto Edit is initiated.
• VCube commences recording at the Cursor position as opposed to the In point.
• The Record Length is the external machine In to Out length.
• VCube computes the Chase Offset and the In and Out record points automatically.
• If an Auto Edit in Assemble mode fails (Stopped by user, invalid incoming TimeCode etc.) the VCube and
VTR cue up where they were at the beginning of the process.
• If an Auto Edit completes successfully the VTR goes back to the Out point after the Postroll, This allows for
assembling video end-to-end.
Note: VCube records beyond the Out point (like a VTR) allowing for subsequent Clip trimming.
Insert (INSERT)
• VCube Insert mode behaves in a similar manner to a VTR.
• Different In and Out points can be set on the VTR and in VCube.
• When an edit is initiated the Chase offset is set automatically.
• The recorded material duration corresponds (exactly) to the VCube In to Out duration.
External Controller
• When the last track arming button on an external controller is switched off, Record mode is disabled.
• When Record mode is inactive, arming a track from an external controller switches Record mode on.
Record Tab page Insert Auto Edit in progress