Sphynx User Manual
© 2000 Merging Technologies
iii
IMPORTANT NOTICE:
Please read the following information very carefully before attempting any installation. Failure to comply with
the precise instructions may result in damage to your Merging hardware. Please read this entire section of the
manual carefully before installation.
STATIC DANGER NOTICE:
Please note that the Sphynx Audio Interface and I/O module cards contain delicate electronic components that
can be damaged or even destroyed when exposed to static electricity. Please take all of the necessary
precautions when handling the Sphynx with the cover removed and all other electronic cards such as the I/O
modules. This notice also applies when performing a firmware upgrade. Take all necessary precautions not to
discharge static electricity when touching any of the Sphynx internals.
INFORMATION FOR THE USER:
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions contained in this manual, may cause harmful interference to radio and
television communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio and television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that of the receiver
Consult the dealer or an experienced audio television technician
NOTE: Connecting this device to peripheral devices that do not comply with CLASS A requirements or using an
unshielded peripheral data cable could also result in harmful interference to radio or television reception. The user is
cautioned that any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. To ensure that the use of this product does not contribute to
interference, it is necessary to use shielded I/O cables.
EMC: The Sphynx complies with the following specifications:
CENELEC EN 55103-1
CENELEC EN 55103-2 (E4 Environment)
Contacting Merging
For all general or sales inquiries:
In Europe, contact our Sales Office: Tel: +41 21 946 04 44 or Fax +41 21 946 04 45
In the U.S., contact our Illinois Office: Tel: +1-847-272-0500 or Fax: +1-847- 272-0597
All documentation inquiries, bug reports or suggestions for improvement can be directed to: [email protected]
Содержание Sphynx
Страница 2: ......
