manualshive.com logo in svg

Merging Technologies Sphynx, Руководство пользователя

Поделиться
Скачать
Merging Technologies Sphynx Скачать руководство пользователя страница 15

Sphynx User Manual

 

© 2000 Merging Technologies 

9 

ODI-B Input 

This EIAJ optical connector receives a signal from any ADAT compatible output. 
The signal present at this input is conveyed to outputs 5-8 in ‘x2’ SR mode. 
In ‘x1’ SR mode and S/PDIF sync, this input accepts an S/PDIF compatible format signal (the Sphynx detects and 
selects automatically between the coaxial and the ODI-B inputs). 

ODI-A Output 

This EIAJ optical connector transmits a signal to any ADAT compatible input. 
This output conveys signals present at inputs 1-8 in ‘x1’ SR mode, and inputs 1-4 in ‘x2’ SR mode. 

ODI-B Output 

This EIAJ optical connector transmits a signal to any ADAT or S/PDIF compatible input. 
In ‘x2’ SR mode, this output conveys signals present at inputs 5-8 in ADAT format. 
In ‘x1’ SR mode, the signal routed to this output is selectable via the Settings Menu. 
See Chapter 7 on how to set the ODI-B OUT routing. 
 

Auxiliary Modules 

AUX 1

AUX 2

 

The AUX-1 and AUX-2 modules are reserved for future I/O modules that will be developed by Merging 
Technologies. 
 

Power Connector 

AC 100-250 VAC

50 / 60 Hz

 

Sphynx uses a variable power supply that accepts AC from 100 to 250 volts. It is designed to be connected to an 
outlet that includes three pins (center pin to ground). The ground connection is an important safety feature designed 
to keep potentially dangerous voltages away from the chassis. Never defeat the ground safety feature. 
 

Never operate the Sphynx with ungrounded outlets. Plugging the Sphynx into an ungrounded outlet, or 
defeating the ground pin, can create a potentially hazardous condition. Merging Technologies cannot be held 
responsible for problems caused to Sphynx or any associated equipment with improper AC connections. 

Содержание Sphynx




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды