Mercusys MW302R Скачать руководство пользователя страница 12

Страница: 12 / 143

Chapter 1

Name

Status

Indication

(WAN)

Off

Router Mode/Access Point Mode: The WAN port is not connected.
Range Extender/WISP Mode: The router is not connected to the host network.

Flashing

Router Mode: The WAN port is connected, but internet is not available.
WISP Mode: Internet is not available.

Router/WISP Mode: Internet is available.
Access Point Mode: The WAN port is connected.
Range Extender Mode: The router is connected to the host network.

(LAN)

Off

Neither LAN port is connected.

At least one LAN port is connected.

* To avoid device damage, do not disconnect or power off your router during upgrade.

1. 2. 2. The Rear Panel

The following items are located on the rear panel (View from left to right).

Item

Description

LAN Ports

These ports connect the router to the local devices.

WAN Port

This port is where you will connect the router to the DSL/cable Modem, or Ethernet.

POWER Socket

The power socket is where you will connect the power adapter. Please use the

power adapter provided with this router.

RESET Button

Press and hold this button for more than 5 seconds to reset the router.

Wireless Antennas

To receive and transmit the wireless data.

Содержание MW302R
















































































































































Результаты поиска

Содержание MW302R

Отзывы:

Похожие инструкции для MW302R

Бренды по названию

Популярные бренды

Mercusys MW302R, Руководство пользователя

Результаты поиска

Содержание MW302R

Отзывы:

Похожие инструкции для MW302R

Бренды по названию

Популярные бренды