57
Chapter 4 Configure the Router in Wireless Router Mode
1. In the
System Time
section, select the way in which the router gets its time:
Get from
Internet
,
Get from Managing Device
,
Manually
.
2. Select your local
Time Zone
.
3. Enter the address or domain of the
NTP Server 1
or
NTP Server 2
.
4. Click
SAVE
.
• To set up Daylight Saving Time:
1. In the
Daylight Saving Time
section, tick the
Enable
box.
2. Select the start time from the drop-down list in the
Start
fields.
3. Select the end time from the drop-down list in the
End
fields.
4. Click
SAVE
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to
the router successfully; otherwise, time-based functions will not take effect.
