Mercury TP-702-59, Руководство по эксплуатации, безопасности и запасным частям

Страница: 32 / 155

-A26-
2. Adjusting “Right Strap Guide”
Loosen the screws on the “Right Strap Guide” and take it out. Then loosen the 2
screws B (HBS0408N) and adjust A according to the strap. Be sure D is about
0.1mm wider than the strap. After adjustment, tighten screws B and put the “Right
Strap Guide” back.
Caution:
If D is too wide, it would lead to sealing problem. However, if it’s too narrow, it
would lead to feeding problem.
3. Adjusting Brush Clearance in the Arch
The brush clearance in the left side and upper left should be about the strap width.
The brush clearance in the upper right should be about 2-3mm narrower to the strap.
The brush clearance in upper side of right chute should be the same to the clearance in
right side of upper arch. The brush clearance in the lower right should be 4-5mm
narrower to the strap.
Note:
The brush clearance could be various according to different package size. The brush
clearance needs to be bigger for not having any effect on reversing especially when
the package size is close to the arch size.
HBS0408N
M7-2-201400
Brush clearance