Mercury TP-702-59, Руководство по эксплуатации, безопасности и запасным частям

Страница: 31 / 155

-A25-
5.3 Adjustment for Heater Temperature
The machine has been already well set for proper heater temperature.
It might be necessary to do some adjustments according to temperature in working
environment, and the quality of PP strap to ensure better sealing efficiency.
Turn ‘’A’’ clockwise to increase the heater temperature and turn it counterclockwise to
decrease the heater temperature.
5.4 Necessary Adjustments After Changing Strap Width Between 5mm and
6mm and 9mm
1. Adjusting “Cutter Holder”
Adjusting the A (Cutter Holder) according to the strap and make sure the width B is
around 0.5mm (0.02”)wider than the strap.
Caution:
If B is too wide, it would lead to sealing problem. However, if it’s too narrow, it
would lead to feeding problem.