Mercury TP-702-59, Руководство по эксплуатации, безопасности и запасным частям

Страница: 24 / 155

-A18-
3.7.2 Strap Reel Installation
1. Open the side door on the right of the
machine (fig. 1).
2. Lift the reel handle up all the way to
the end (fig. 1).
3. Release the Reel Nut Handle by
pressing and turning it to the left.
4. Take out the Outer Flange.
5. Install a new strap coil onto the drum
according to the instructions on the
reel.
6. Put Outer Flange back and the Reel
Nut Handle. Turning the Reel Nut
Handle to the right to lock it.
7. Remove the protective straps (B) and
the stickers (A)
8. Press down the reel handle to put the
reel back into the machine.
Note:
The Reel Nut Handle is released by pressing and turning to the left. Tighten it
by turning it to the right.
Fig. 1
Side Door
Handle