manualshive.com logo in svg

Mercury Quicksilver 200 Tendy Slatted, Руководство пользователя

Поделиться
Скачать
Mercury Quicksilver 200 Tendy Slatted Скачать руководство пользователя страница 31

Trailering Boat

Use a trailer that will properly support the boat hull. Position the boat on the

trailer so it will rest in a stable position on the trailer supports. The boat must be

properly secured to the trailer. Secure the boat to the trailer using tie‑down

straps. Tighten the straps down securely so they will prohibit boat movement.

Make sure to protect the air chamber tubes so they will not get chafed or

damaged from the tie‑down straps. Trailer your boat with the outboard tilted

down in a vertical operating position. If additional ground clearance is required,

the outboard should be tilted up using an accessory outboard support device.

Refer to your local dealer for recommendations. Additional clearance may be

required for railroad crossings, driveways, and trailer bouncing.

66433

TRANSPORTING

eng

23

  

Содержание Quicksilver 200 Tendy Slatted
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды