Mercury 6-5 Stat – Installation & User Guide
Wiring:
Relay 4 and 5 N/O are fed from the supply input
!
Note:
Suitable mechanical restraints on the wiring to the controller may be required; dependant on cable types, to
prevent undue stress or distortion on the controller connectors.
Over-ride input Resistors:
Example of 820-Ohm resistor fitted on Input 2
Connect to remote switch
Supply Neutral
Not Used
Supply Live, Relay 4&5 Common
Relay 5 N/O
Relay 4 N/O
Relay 3 N/O
Relay 2 N/O
Relay 1 Common
Relay 1 N/O
Relay 2&3 Common
Ensure that all power is
switched off before
installing or maintaining
this product
Revision 1.2
Page 19 of 21
