Mercury Pinpoint GPS, Руководство пользователя, Страница: 25 / 32

Overwriting a stored route is accomplished using the same procedure as
storing a new route.
Recalling a Stored Route
A stored route can be recalled while operating in any mode by pressing the
route playback
button, then pressing the desired
memory
button. The trolling
motor will emit an ascending chirp to indicate that the route has been
successfully recalled.
IMPORTANT: When recalling a stored route, the system will calculate a
straight‑line course from your current position to the nearest point on the
recalled route. Ensure that there are no obstructions to navigation between
your current position and the recalled route. The system will recall a stored
route even if obstructions are present. If obstructions are encountered, navigate
around them by operating in manual mode.
!
WARNING
Avoid serious injury from colliding with other boats, running aground, or
striking objects in the water. The Pinpoint GPS system cannot detect other
boats, shallow water, or objects in the water. Always beware of possible
obstructions to navigation when operating in any Pinpoint GPS mode.
53022
Recalling a stored route—Beware of possible obstructions to navigation
If the selected memory position is empty, or if the boat is over 1.6 km (1 mile)
from a point on the selected route, the trolling motor will emit an error tone and
exit the route mode.
PRODUCT INSTALLATION AND OPERATION
eng
21