Mercury Pinpoint GPS, Руководство пользователя, Страница: 15 / 32

2. Use the
left turn
and
right turn
buttons to steer the unit so that it is
facing straight ahead, parallel with the keel of the boat, with the nose cone
of the lower unit facing forward and the propeller facing aft.
View of boat from above
a - Nose cone facing the bow
b - Propeller facing the stern
c - Parallel lines
3. Once the lower unit is positioned as close to parallel with the keel as
possible, press and hold the
manual mode
button, then press and
release the
1
,
1
, then
2
buttons in sequence. The trolling motor will emit
an audible tune, flash the status indicator light, and then return to manual
mode, completing the mounting angle calibration.
COMPASS CALIBRATION
IMPORTANT: This calibration is completed at the factory. It should only be
repeated if the Pinpoint GPS system is not responding properly. This calibration
must be done with the boat in the water, using the primary propulsion engine.
54441
b
a
c c
PRODUCT INSTALLATION AND OPERATION
eng
11