Mercury Pinpoint GPS, Руководство пользователя, Страница: 16 / 32

IMPORTANT: A fixed GPS position is required to complete the compass
calibration. The Xi5 will emit an audible tune once it has acquired a fixed GPS
position (in the default audio mode), and the GPS status indicator light will
illuminate.
a - Manual mode
b - #1 button
1. Locate a suitable area clear of obstructions to navigation (both above and
below the waterline) to perform the compass calibration.
2. Deploy the trolling motor. Verify that you are in a location where your
trolling motor and primary propulsion engine will not hit bottom or other
obstructions.
3. Press and hold the
manual mode
button, then press
1
,
1
,
1
. The trolling
motor will emit three ascending‑tone beeps.
4. Use the primary propulsion engine to slowly drive the boat in two
complete circles. The trolling motor will emit a tune when the compass
calibration is complete.
RESET TO FACTORY CALIBRATION
To reset the trolling motor to the factory calibration, press and hold the
manual
mode
button, then press
1
,
1
,
4
.
Operating the Pinpoint GPS System
PINPOINT GPS STARTUP
The global positioning system (GPS) is a satellite‑based navigation system
capable of providing positional information anywhere on Earth, provided that
the GPS receiver has a clear line of sight to at least four GPS satellites.
53737
b
a
PRODUCT INSTALLATION AND OPERATION
12
eng