WIRING DIAGRAMS
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999
Page 4E-23
NOTE:
1
BROWN/WHITE wire is taped back at instrument end. If installing on boat that is
equipped with MerCruiser Sterndrive, BROWN/WHITE wire is connected to trim sender
terminal block. If installing on MerCruiser Inboard, BROWN/WHITE wire is taped back at
engine end, or it may be used for an accessory (limit 5 amperes).
NOTE:
2
An accessory fuse panel may be connected at this location. The combined current
draw of the primary station and secondary station MUST NOT exceed 35 amperes.
NOTE:
3
Connect wires together with screw and hex nut. Apply Quicksilver Liquid Neoprene
to connection and slide rubber sleeve over connection.
A - Secondary Station
1 -
Start - Stop Panel
2 -
Tachometer
3 -
Oil Pressure
4 -
Water Temperature
5 -
Battery Meter
B - Primary Station
1 -
Ignition Switch
2 -
Tachometer
3 -
Oil Pressure
4 -
Water Temperature
5 -
Battery Meter
6 -
To Engine
7 -
20 Ampere Fuse
Downloaded from
https://needmanual.com/
Index