ACPI Suspend Type
Default: S1 (POS)
Use this item to define how your system suspends. In the default, S1(POS), the
suspend mode is equivalent to a software power down. If you select S3 (STR),
the suspend mode is a suspend to RAM – the system shuts down with the
exception of a refresh current to the system memory.
Video Off Option
Default: Susp,Stby Off
This item defines how the video is powered down to save power. As a default,
this is set to Susp,Stby Off, which means the video system will turn off
whenever the system is suspended or in standby mode.
Video Off Method
Default: DPMS Supported
This item defines how the video is powered down to save power. As a default,
this is set to DPMS (display power management software).
Switch Function
Default: Break/Wake
This item defines if pressing the power switch will cause the system to wake up
from suspend or standby mode.
MODEM Use IRQ
Default: 3
If you want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request line
(IRQ) that is used by the modem. You might have to connect the fax/modem to a
mainboard Wake On Modem connector for this feature to work.
Hot Key Function As
Default: Disable
This item defines the function of an auxiliary power hot key on the system
keyboard. Your keyboard must feature such a hot key for this function to work.
When enabled, It can be set to power off or suspend the system.
52
