Mercury GO BOLDLY SeaPro 500hp, Руководство по эксплуатации и обслуживанию, Страница: 75 / 135

5. Ignition key starting ‑ Turn the ignition key to the
START
position and
release the key. The electronic starting system will automatically crank the
engine for starting. If the engine fails to start, the engine will stop
cranking. Turn the key to the
START
position again until the engine starts.
ST
AR
T
OF
F ACC ON
ST
AR
T
OF
F A
CC ON
3485
Gear Shifting
IMPORTANT: Observe the following:
•
Never shift the outboard into or out of gear unless the engine speed
is at idle. Shifting at higher than engine idle speed could cause
damage to the gearcase.
•
Do not shift the outboard into reverse when the forward motion of
the boat is greater than a no wake speed. Shifting into reverse at
higher boat speeds could cause the engine to stall, and in some
situations, this could cause water to be drawn into the cylinders,
resulting in severe engine damage.
• The outboard has three gear shift positions: forward (F), neutral (N), and
reverse (R).
R
N
F
R
N
F
71972
R
N
F
• When shifting, always stop at the neutral position and allow the engine
idle speed to stabilize before shifting into another gear.
OPERATION
eng
65