Mercury GO BOLDLY SeaPro 500hp, Руководство по эксплуатации и обслуживанию, Страница: 58 / 135

Turning off one of the outer engines while underway will cause the center
engine to go into forced neutral/idle. Operation to the center engine can be
restored by moving the control handle of the functioning outer engine back into
neutral position and then engaging. The center engine speed and gear shift will
then be controlled by the functioning outer engine.
Turning off the center engine while underway will have no effect on the
operation of the outer engines.
If a failure should occur while underway which causes one of the outer engines
into forced neutral/idle condition, the center engine will also be forced to
neutral/idle. Operation to the center engine can be restored by moving the
control handle of the functioning outer engine back into neutral and then
engaging.
QUAD-ENGINE THROTTLE AND SHIFT OPERATION
Movement of the handles on the remote control allows the boat operator to
control the engine throttle speed and gear shift positions of all four engines.
The throttle and shift function is dependent on what engines are running. Refer
to the following table.
Port Outer
Engine
Port
Inner
Engine
Starboard
Inner
Engine
Starboard
Outer Engine Control Handle Function
Running Running Running Running
Port inner and outer
engines throttle and shift
= controlled by port
control handle
Starboard inner and
outer engines throttle
and shift = controlled by
starboard control handle
Running Running Off Off
Port inner and outer
engine throttle and shift =
controlled by port control
handle
Off Off Running Running
Starboard inner and
outer engine throttle and
shift = controlled by
starboard control handle
Off (ignition
key switch
turned
ON
)
Running Running Running
Port inner engine throttle
and shift = controlled by
port control handle
Running Running Running
Off (ignition
key switch
turned
ON
)
Starboard inner engine
throttle and shift =
controlled by starboard
control handle
FEATURES AND CONTROLS
48
eng