Mercury 8.2 MAG HO Скачать руководство пользователя

Страница: 13 / 132

Section 1 - Warranty

90-8M0074352

eng

OCTOBER 2012

Page 5

What Mercury Marine Will Do

Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our option, repairing a defective part, replacing

such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the Mercury

Marine product. Mercury Marine reserves the right to improve or modify products from time to time without assuming an

obligation to modify products previously manufactured.

How to Obtain Warranty Coverage

The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for

warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized

to service the product. If the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury

Marine. Mercury Marine will then arrange for the inspection and any covered repair. The purchaser in that case shall pay for all

related transportation charges and travel time. If the service provided is not covered by this warranty, the purchaser shall pay for

all related labor and material and any other expenses associated with that service. The purchaser shall not, unless requested by

Mercury Marine, ship the product or parts of the product directly to Mercury Marine. Proof of registered ownership must be

presented to the dealer at the time warranty service is requested in order to obtain coverage.

What Is Not Covered

This limited warranty does not cover the following:

•

Routine maintenance items

•

Adjustments

•

Normal wear and tear

•

Damage caused by abuse

•

Abnormal use

•

Use of a propeller or gear ratio that does not allow the engine to run in its recommended RPM range (see the Operation,

Maintenance & Warranty manual)

•

Operation of the product in a manner inconsistent with the recommended operation and duty cycle section of the Operation,

Maintenance & Warranty manual

•

Neglect

•

Accident

•

Submersion

•

Improper installation (proper installation specifications and techniques are set forth in the installation instructions for the

product)

•

Improper service

•

Use of an accessory or part that was not manufactured or sold by Mercury Marine and that damages the Mercury product

•

Jet pump impellers and liners

•

Operation with fuels, oils, or lubricants that are not suitable for use with the product (see the Operation, Maintenance &

Warranty manual)

•

Alteration or removal of parts

•

Water entering the engine through the fuel intake, air intake, or exhaust system or damage to the product from insufficient

cooling water caused by blockage of the cooling system by a foreign body

•

Running the engine out of water

•

Mounting the engine too high on the transom

•

Operating the boat with the engine over trimmed

Use of the product for racing or other competitive activity, or operating with a racing‑type lower unit at any point, even by a

previous owner of the product, voids the warranty. Expenses related to haul‑out, launch, towing, storage, telephone, rental,

inconvenience, slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other type of incidental or

consequential damages are not covered by this warranty. Also, expenses associated with the removal or replacement of boat

partitions or other material in order to gain access to the product are not covered by this warranty. No individual or entity,

including Mercury Marine authorized dealers, has been given authority by Mercury Marine to make any affirmation,

representation, or warranty regarding the product, other than those contained in this limited warranty. If such affirmation,

representation, or warranty is made, it shall not be enforceable against Mercury Marine.

Содержание 8.2 MAG HO





































































































































Результаты поиска

Содержание 8.2 MAG HO

Отзывы:

Похожие инструкции для 8.2 MAG HO

Бренды по названию

Популярные бренды

Mercury 8.2 MAG HO, Руководство пользователя

Результаты поиска

Содержание 8.2 MAG HO

Отзывы:

Похожие инструкции для 8.2 MAG HO

Бренды по названию

Популярные бренды