600.101/102UK User Manual
behind the finger guards.
➢
Disconnect circuit power and discharge all
high-voltage capacitors before testing resistance,
continuity, diodes or hFE.
➢
Replace the battery as soon as the battery
indicator
appears. With a low battery, the
meter may produce false readings that can lead to
electric shock and personal injury.
➢
Remove the connection between the testing leads
and the circuit being tested and turn the meter
power off before opening the meter case.
➢
The internal circuit of the meter shall not be
altered at will to avoid damage of the meter and
any accident.
➢
Soft cloth and mild detergent should be used to
clean the surface of the meter in regular basis. No
abrasive and solvent should be used to prevent
the surface of the meter from corrosion, damage
and accident.
➢
The meter is suitable for indoor use only.
➢
Turn the meter power off when it is not in use and
take out the battery when not using for a long time.
Check the battery at regular basis as it may leak
when it has been using for some time, replace the
battery as soon as leaking appears. A leaking
battery will damage the meter.
