Mercury 250 Jet, Руководство по установке

Страница: 41 / 46

250 HP JET DRIVE INSTALLATION MANUAL
Page 41
90-10240040 DECEMBER 2003
Top View
a
b c
d
a - 250 hp – 878147-A1 Muffler Assembly, Port [22.8 cm (9.0 in.)] with
7.6 cm (3.0 in.) Outlet
b - Connection Piping between Expansion Chamber and Muffler must be made of
7.6 cm (3.0 in.) O.D. Tubing. Tubing must be either 5052 or 6061 (14 ga) alumi-
num or type 304 (14 ga) stainless steel to protect against corrosion.
c - 57885-A1 Flange Assembly (2 required) or equivalent through transom fittings
may extend 12.7 cm (5 in.) below water line for quiet idle operation. Exhausting
under a swim platform or other horizontal surface may cause transmission of
noise and vibration to the boat during operation.
d - 250 hp – 878148-A1 Muffler Assembly, Starboard [22.8 cm (9.0 in.)] with
7.6 cm (3.0 in.) Outlet.