Mercury 250 Jet, Руководство по установке

Страница: 22 / 46

250 HP JET DRIVE INSTALLATION MANUAL
Page 22 90-10240040 DECEMBER 2003
10. Apply perfect seal to end threads.
19
Perfect Seal
19
11. Turn bellows nut out and tighten against cable end adaptor.
54908
a
b
a - Bellows Clamp
b - Bellows Nut Tight Against Jam Nut
12. Turn rudder to port to compress bellows as much as possible. Push bellows over cable
conduit and secure with bellows clamp.
13. Secure bellows to thru-hull fitting with clamp. Slide slit adaptor over cable and push into
bellows. Secure with clamp.
a
b
c
c
d
e
a - Steering Cable, Thru-Hull Fitting, and Bellows Assembly
b - Thru-Hull Fitting and Nut
c - Clamp
d - Bellows
e - Slit Adaptor
NOTE: Check for proper placement of slit adaptor around cable. Placement of wrong slit
adaptor may result in leak.