Mercury 2009 Sable Скачать руководство пользователя страница 25

Страница: 25 / 344

To search for specific RBDS music categories:

When the desired

category appears in the display, press

to find the desired type,

then press and release

SEEK, SEEK

or press and hold SCAN to

begin the search.

To view the station name or type:

When the desired category appears

in the display, press TEXT/SCAN to toggle between displaying the station
type (COUNTRY, ROCK, etc.) or the station name (WYCD, WXYZ, etc.).

BASS:

Press MENU to reach the bass setting. Use

to adjust.

TREB (Treble):

Press MENU to reach the treble setting. Use

adjust.

BAL (Balance):

Press MENU to reach the balance setting. Use

to adjust the audio between the left (L) and right (R) speakers.

FADE:

Press MENU to reach the fade setting. Use

to adjust the

audio between the back (B) and front (F) speakers.

SPEED VOL (Speed sensitive volume, if equipped):

Press MENU to

reach the SPEEDVOL setting. Radio volume automatically gets louder
with increasing vehicle speed to compensate for road and wind noise.
Use

to adjust.

The default setting is

off;

increasing your vehicle speed will not change

the volume level.

Adjust

1–7:

Increasing this setting from 1 (lowest setting) to 7 (highest

setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

TRACK/FOLDER MODE:

Available only on MP3 discs in CD mode.

In track mode, press

SEEK, SEEK

to scroll through all tracks on

the disc
In folder mode, press

SEEK, SEEK

to scroll through tracks

within the selected folder.
Press

FOLDER, FOLDER

to access the previous/next folder (if

available). Press OK to close and return to the main menu.

2009 Sable

(mgo)

Owners Guide, 1st Printing
USA

(fus)

Entertainment Systems

Содержание 2009 Sable

























































































































































































































































































































































Результаты поиска

Содержание 2009 Sable

Отзывы:

Похожие инструкции для 2009 Sable

Бренды по названию

Популярные бренды

Mercury 2009 Sable, Руководство пользователя

Результаты поиска

Содержание 2009 Sable

Отзывы:

Похожие инструкции для 2009 Sable

Бренды по названию

Популярные бренды