•
3.0L DOHC V6 Duratec engine
•
If required, add engine oil to the engine. Refer to
Adding engine oil
in this chapter.
•
Do not overfill the engine with oil. Oil levels above the upper
hole or upper mark may cause engine damage.
If the engine is
overfilled, some oil must be removed from the engine by an authorized
dealer.
7. Put the dipstick back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to
Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
MAX, FULL or upper hole/mark (depending on application) on the
engine oil level dipstick.
4. Install the dipstick and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap clockwise
1/4 of a turn until it is seated.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level dipstick and/or the engine oil filler cap removed.
2009 Mariner
(mrn)
Owners Guide, 1st Printing
USA
(fus)
Maintenance and Specifications
277