Mercury 2005 Sable Скачать руководство пользователя страница 72

Страница: 72 / 248

KEYS

The key operates all locks on your vehicle. In case of loss, replacement
keys are available from your dealer.

You should always carry a second key with you in a safe place in case
you require it in an emergency.

Refer to the

SecuriLock

娂

passive anti-theft system

section in this

chapter for more information.

POWER DOOR LOCKS

Press control to unlock or lock all
doors.

AUTOLOCK (IF EQUIPPED)

This feature automatically locks all vehicle doors when the following
conditions are met:

•

all the doors are closed,

•

the engine is running,

•

you shift into gear, putting the vehicle in motion, and.

•

the vehicle’s speed is greater than 3 mph (5 km/h).

RELOCK

The autolock feature repeats when the following conditions are met:

•

any door is opened then closed while the engine is running, and

•

you shift into gear, putting the vehicle in motion, and

•

the vehicle’s speed is greater than 3 mph (5 km/h).

TO DEACTIVATE/REACTIVATE THE AUTOLOCK FEATURE USING
THE POWER DOOR UNLOCK CONTROL

You must complete Steps 1-4 within 30 seconds or the procedure will
have to be repeated. If the procedure needs to be repeated, you must
wait 30 seconds.

Note:

All doors must be closed and remain closed

throughout the process.

REVIEW COPY

2005 Sable

(sab)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Locks and Security

Locks and Security

Содержание 2005 Sable

























































































































































































































































Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды

Mercury 2005 Sable, Руководство пользователя

Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды