Mercury 2005 Sable Скачать руководство пользователя страница 110

Страница: 110 / 248

Always transport children 12 years old and under in the back
seat and always properly use appropriate child restraints.

National Highway Traffic Safety Administration (NHTSA)
recommends a minimum distance of at least 10 inches (25 cm)

between an occupant’s chest and the driver air bag module.

Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.

Steps you can take to properly position yourself away from the airbag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly (one or two degrees) from the upright
position.

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the air bag
supplemental restraint system (SRS) or its fuses. See your Ford

or Lincoln Mercury dealer.

The front passenger air bag is not designed to offer protection to
an occupant in the center front seating position.

Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow

hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.

REVIEW COPY

2005 Sable

(sab)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Seating and Safety Restraints

110

Содержание 2005 Sable

























































































































































































































































Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды

Mercury 2005 Sable, Руководство пользователя

Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды