Mercury 2005 Sable Скачать руководство пользователя страница 27

Страница: 27 / 248

OPERATING TIPS

•

To reduce fog build up on the windshield during humid weather, place
the air flow selector in the

position.

•

To reduce humidity build up inside the vehicle,

do not

drive with the

airflow selector in the OFF position, or with

(recirculated air)

engaged without A/C engaged as well.

•

Do not put objects under the front seats that will interfere with the
airflow to the back seats.

•

Remove any snow, ice or leaves from the air intake area at the base of
the windshield.

•

For maximum cooling in the AUTO mode, press AUTO and set to
desired temperature; do not press A/C or

(recirculated air). In

the manual override mode, press

and A/C, then set the

temperature to 60°F (16°C) and the fan to the highest setting.

•

To improve the A/C cool down of the vehicle cabin, drive with the
windows slightly open for the first 2–3 minutes after starting the
vehicle or until the vehicle has “aired out.”

To aid in side window defogging/demisting in cold weather:

1. Select

2. Select A/C.

3. Adjust the temperature control to maintain comfort.

4. Set the fan speed to the highest setting.

5. Direct the outer instrument panel vents towards the side windows.

To increase airflow to the outer instrument panel vents, close the vents
located in the middle of the instrument panel.

Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.

REVIEW COPY

2005 Sable

(sab)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Climate Controls

Содержание 2005 Sable

























































































































































































































































Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды

Mercury 2005 Sable, Руководство пользователя

Результаты поиска

Содержание 2005 Sable

Отзывы:

Похожие инструкции для 2005 Sable

Бренды по названию

Популярные бренды