Mercury 2003 Скачать руководство пользователя страница 38

Страница: 38 / 265

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking lamps,

instrument panel lamps, license
plate lamps and tail lamps.

Turns the headlamps on.

Autolamp delay system

The autolamp system sets the headlamps to turn on and off
automatically. The autolamp control, located on the headlamp control,
may be set to:

•

turn on the lamps automatically at night

•

turn off the lamps automatically during the daylight

•

keep the lamps on for up to three minutes after the key is turned to
OFF.

To turn the autolamps on, rotate the control counterclockwise to

Foglamp control

The foglamps can be turned on only
when the headlamp control is in

the

and

position and

the high beams are not turned on.

Pull headlamp control towards you
to turn foglamps on. The foglamp
indicator light

will illuminate

when foglamp is activated.

Push the headlamp control towards the instrument panel to deactivate
the foglamps.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output. To activate:

•

the ignition must be in the ON position and

•

the headlamp control is in the OFF or Parking lamps position

•

the parking brake must be disengaged.

Lights

Lights

Содержание 2003










































































































































































































































































Результаты поиска

Содержание 2003

Отзывы:

Похожие инструкции для 2003

Бренды по названию

Популярные бренды

Mercury 2003, Руководство пользователя

Результаты поиска

Содержание 2003

Отзывы:

Похожие инструкции для 2003

Бренды по названию

Популярные бренды