Mercury 2003 Скачать руководство пользователя страница 207

Страница: 207 / 265

SERVICE RECOMMENDATIONS

•

Use the

Scheduled Maintenance Guide

to track routine service.

•

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications.

•

Your dealership can provide parts and service.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

•

Do not work on a hot engine.

•

Make sure that nothing gets caught in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all open flames and other lit material away from the battery and
all fuel related parts.

Working with the engine off

1. Set the parking brake and shift to P (Park).

2. Turn off the engine and remove the key.

3. Block the wheels.

Working with the engine on

1. Set the parking brake and shift to P (Park).

2. Block the wheels.

Do not start your engine with the air cleaner removed and do
not remove it while the engine is running.

Maintenance and Specifications

Maintenance and Specifications

206

Содержание 2003










































































































































































































































































Результаты поиска

Содержание 2003

Отзывы:

Похожие инструкции для 2003

Бренды по названию

Популярные бренды

Mercury 2003, Руководство пользователя

Результаты поиска

Содержание 2003

Отзывы:

Похожие инструкции для 2003

Бренды по названию

Популярные бренды