Mercury 2002 Cougar Скачать руководство пользователя страница 78

Страница: 78 / 241

Cargo cover (if equipped)

Your vehicle may be equipped with a cargo area shade that covers the
luggage compartment of your vehicle.

To install the shade:

1. Fasten the cover into the
mounting brackets (make sure the
cover is right side up).

2. Pull the end of the shade toward
you and hook the sides into the
notches (right side first) in the rear
trim panels.

To reduce the risk of injuries, the fasteners for cargo area cover
must be properly attached to the mounting clips on the rear trim

panels.

Do not place any objects on the cargo area cover. They may
obstruct your vision or strike occupants of the vehicle in the

case of a sudden stop or collision.

The cover may cause injury in a sudden stop or accident if it is
not securely installed.

Rewinding the shade

With extended use, the cargo shade may lose its spring tension. If this
occurs, the shade must be manually rewound. This is a two-person
operation.

1. Remove the shade from the vehicle and extend it with the smooth
grain facing you.

Driver Controls

Содержание 2002 Cougar


















































































































































































































































Результаты поиска

Содержание 2002 Cougar

Отзывы:

Похожие инструкции для 2002 Cougar

Бренды по названию

Популярные бренды

Mercury 2002 Cougar, Руководство пользователя

Результаты поиска

Содержание 2002 Cougar

Отзывы:

Похожие инструкции для 2002 Cougar

Бренды по названию

Популярные бренды