Mercury 2002 Cougar Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 241

background image

How does the personal safety system work?

The Personal Safety System can adapt the deployment strategy of your
vehicle’s safety devices according to crash severity and occupant
conditions. A collection of crash and occupant sensors provides
information to the Restraints Control Module (RCM). During a crash, the
RCM activates the safety belt pretensioners and/or either one or both
stages of the dual-stage air bag supplemental restraints based on crash
severity and occupant conditions.

The fact that the pretensioners or air bags did not activate for both front
seat occupants in a collision does not mean that something is wrong with
the system. Rather, it means the Personal Safety System determined the
accident conditions (crash severity, belt usage, etc.) were not
appropriate to activate these safety devices. Front air bags and
pretensioners are designed to activate only in frontal and near-frontal
collisions, not rollovers, side-impacts, or rear-impacts unless the collision
causes sufficient longitudinal deceleration.

Driver and passenger dual-stage air bag supplemental restraints

The dual-stage air bags offer the capability to tailor the level of air bag
inflation energy. A lower, less forceful energy level is provided for more
common, moderate-severity impacts. A higher energy level is used for
the most severe impacts. Refer to

Air bag Supplemental Restraints

section in this chapter.

Front crash severity sensor

The front crash severity sensor enhances the ability to detect the
severity of an impact. Positioned up front, it provides valuable
information early in the crash event on the severity of the impact. This
allows your Personal Safety System to distinguish between different
levels of crash severity and modify the deployment strategy of the
dual-stage air bags and safety belt pretensioners.

Driver’s seat position sensor

The driver’s seat position sensor allows your Personal Safety System to
tailor the deployment level of the driver dual-stage air bag based on seat
position. The system is designed to help protect smaller drivers sitting
close to the driver air bag by providing a lower air bag output level.

Front safety belt usage sensors

The front safety belt usage sensors detect whether or not the driver and
front outboard passenger safety belts are fastened. This information
allows your Personal Safety System to tailor the air bag deployment and

Seating and Safety Restraints

100

«
...
99
100
101
102
103
...
»

Содержание 2002 Cougar


















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2002 Cougar

Бренд: 3SIXT Страницы: 12

Бренд: Yakima Страницы: 19

UCI-11C NTV-KIT331

Бренд: Nav TV Страницы: 4

Chevrolet Silverado 2500HD 2021

Бренд: GMC Страницы: 433

Бренд: Buick Страницы: 20

Бренд: Mitsubishi MOTORS Страницы: 416

Easy Air Auto Screen

Бренд: Wagan Страницы: 8

Бренд: Cadillac Страницы: 2

Бренд: Buick Страницы: 20

Бренд: Navman Страницы: 10

Бренд: Macrom Страницы: 10

Бренд: Aston Martin Страницы: 415

Omni-Bike Sport Ducato

Бренд: OMNISTOR Страницы: 5

Бренд: Yenkee Страницы: 22

1993 Civic Coupe

Бренд: Honda Страницы: 201

Бренд: TOP VEHICLE TECH Страницы: 8

Бренд: Federal Signal Corporation Страницы: 12

Install Essentials CAN1

Бренд: Directed Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды