Mercury 1996 Cougar, Руководство пользователя

Страница: 49 / 324

48
%
*
[ST10300( ALL)02/95]
Starting Your Engine
*
[ST10325( ALL)02/95]
To start your engine:
*
[ST10350( ALL)05/95]
1. Follow the steps under Preparing to Start
Your Vehicle at the beginning of this section.
*
[ST10353( ALL)03/95]
2. Turn the ignition key to the ON position.
*
[ST10357( ALL)03/95]
3. DO NOT depress the accelerator pedal when
starting your engine. DO NOT use the
accelerator while the vehicle is parked.
*
[ST10360( ALL)02/95]
4. Turn the key to the START position
(cranking) until the engine starts. Allow the
key to return to the ON position after the
engine has started.
*
[ST10370( ALL)02/95]
If you have difficulty in turning the key,
rotate the steering wheel slightly because it
may be binding.
%
*
[ST10430( ALL)04/95]
For a cold engine:
*
[ST10440( ALL)04/95]
❑
At temperatures 10˚F (-12˚C) and below: If
the engine does not start in fifteen (15)
seconds
on the first try, turn the key to OFF,
wait approximately ten (10) seconds so you
do not flood the engine, then try again.
*
[ST10450( ALL)04/95]
❑
At temperatures above 10˚F (-12˚C): If the
engine does not start in five (5) seconds on
the first try, turn the key to OFF, wait
approximately ten (10) seconds so you do not
flood the engine, then try again.
%
*
[ST10460( ALL)04/95]
For a warm engine:
*
[ST10470( ALL)04/95]
❑
Do not hold the key in the START position
for more than five (5) seconds at a time. If
the engine does not start within five (5)
seconds on the first try, turn the key to the
OFF position. Wait a few seconds after the
starter stops, then try again.
File:rcstc.ex
Update:Mon Jun 12 16:50:31 1995