Mercury 1996 Cougar Скачать руководство пользователя страница 292

Страница: 292 / 324

294

[SV57600( ALL)01/95]

Body

[SV57700( ALL)01/95]

❑

Wash vehicle thoroughly to remove dirt,
grease, oil, tar or mud from exterior surfaces,
rear wheel housing and underside of front
fenders.

[SV57800( ALL)01/95]

❑

Periodically wash vehicles stored in exposed
locations.

[SV57900( ALL)01/95]

❑

Touch-up raw or primed metal to prevent
rust.

[SV58000( ALL)01/95]

❑

Cover chrome and stainless steel parts with a
thick coat of auto wax to prevent
discoloration. Re-wax as necessary when the
vehicle is washed.

[SV58100( ALL)04/95]

❑

Lubricate all hood, door and trunk lid hinges
and latches with a light grade oil.

[SV58200( ALL)01/95]

❑

Cover interior soft trim to prevent fading.

[SV58300( ALL)01/95]

❑

Keep all rubber parts free from oil and
solvents.

[SV58350( ALL)01/95]

Engine

[SV58400( ALL)01/95]

❑

Start engine every 15 days. Run at fast idle
until it reaches normal operating temperature.

[SV58500( ALL)01/95]

❑

With your foot on the brake, shift through all
the gears while the engine is running.

[SV58600( ALL)01/95]

Fuel system

[SV58700( ALL)07/94]

❑

Fill fuel tank with high-quality unleaded fuel
until the first automatic shutoff of the fuel
pump nozzle.

[SV58900( ALL)03/95]

NOTE: During extended periods of vehicle

storage (60 days or more), fuel may
deteriorate due to oxidation. This can
damage rubber and other polymers in
the fuel system and may also clog
small orifices.

File:rcsvc.ex

Update:Mon Jun 12 16:45:15 1995

Содержание 1996 Cougar





































































































































































































































































































































Результаты поиска

Содержание 1996 Cougar

Отзывы:

Похожие инструкции для 1996 Cougar

Бренды по названию

Популярные бренды

Mercury 1996 Cougar, Руководство пользователя

Результаты поиска

Содержание 1996 Cougar

Отзывы:

Похожие инструкции для 1996 Cougar

Бренды по названию

Популярные бренды