Mercury 15 Скачать руководство пользователя страница 35

Страница: 35 / 70

FEATURES & CONTROLS

ENGAGING SHALLOW WATER DRIVE

Reduce engine speed to idle. Shift the outboard into neutral or forward gear position.

Push down the shallow water drive lever. Tilt outboard up to the shallow water drive position. Be sure the

cooling water intake is submerged.

ob00551

a -

Shallow water drive lever

b -

Water intake

IMPORTANT: While in shallow water drive position, do not operate the outboard in reverse. Operate the outboard

at slow speed and keep the cooling water intake submerged.
3.

To release down to run position, lift up the shallow water drive lever. Tilt up the outboard to disengage the

shallow water drive lock and lower it down.

ob00552

a -

Shallow water drive lever

Setting The Operating Angle Of Your Outboard

The vertical operating angle of your outboard is adjusted by changing the position of the tilt pin in the five adjustment

holes provided. The outboard should be locked against this tilt pin by setting the tilt lock lever to the lock/run position.

Proper adjustment allows the boat to achieve optimum performance, stability, and minimize steering effort.

NOTE: Refer to the following lists when adjusting the operating angle of your outboard.

The tilt pin should be adjusted so the outboard is positioned to run perpendicular to the water when the boat is

running at full speed. This allows the boat to be driven parallel to the water.

Содержание 15







































































Результаты поиска

Содержание 15

Отзывы:

Бренды по названию

Популярные бренды

Mercury 15, Руководство по обслуживанию

Результаты поиска

Содержание 15

Отзывы:

Бренды по названию

Популярные бренды