Mercury 15 Скачать руководство пользователя

Страница: 10 / 70

WARRANTY INFORMATION

Corrosion damage caused by stray electrical currents (on-shore power connections, nearby boats, submerged

metal) is not covered by this corrosion warranty and should be protected against by the use of a corrosion protection

system, such as the Mercury Precision Parts or Quicksilver MerCathode system and/or Galvanic Isolator. Corrosion

damage caused by improper application of copper base anti-fouling paints is also not covered by this limited

warranty. If anti-fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA) base anti-fouling paints are

recommended on Outboard and MerCruiser boating applications. In areas where TBTA base paints are prohibited

by law, copper base paints can be used on the hull and transom. Do not apply paint to the outboard or MerCruiser

product. In addition, care must be taken to avoid an electrical interconnection between the warranted product and

the paint. For MerCruiser product, an unpainted gap of at least 38 mm (1.5 in.) should be left around the transom

assembly. Refer to the Operation and Maintenance Manual for additional details.
For additional information regarding events and circumstances covered by this warranty, and those that are not,

see the Warranty Coverage section of the Operation and Maintenance Manual, incorporated by reference into this

warranty.

DISCLAIMERS AND LIMITATIONS:

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE

DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE

EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED

FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW

FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A

RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE

TO STATE AND COUNTRY TO COUNTRY.

Warranty Coverage And Exclusions

The purpose of this section is to help eliminate some of the more common misunderstandings regarding warranty

coverage. The following information explains some of the types of services that are not covered by warranty. The

provisions set forth following have been incorporated by reference into the Three Year Limited Warranty Against

Corrosion Failure, the International Limited Outboard Warranty, and the United States and Canada Limited

Outboard Warranty.
Keep in mind that warranty covers repairs that are needed within the warranty period because of defects in material

and workmanship. Installation errors, accidents, normal wear, and a variety of other causes that affect the product

are not covered.
Warranty is limited to defects in material or workmanship, but only when the consumer sale is made in the country

to which distribution is authorized by us.
Should you have any questions concerning warranty coverage, contact your authorized dealer. They will be

pleased to answer any questions that you may have.

GENERAL EXCLUSIONS FROM WARRANTY

Minor adjustments and tune-ups, including checking, cleaning or adjusting spark plugs, ignition components,

carburetor settings, filters, belts, controls, and checking lubrication made in connection with normal services.

Factory installed jet drive units - Specific parts excluded from the warranty are: The jet drive impeller and jet

drive liner damaged by impact or wear, and water damaged drive shaft bearings as a result of improper

maintenance.

Damage caused by neglect, lack of maintenance, accident, abnormal operation or improper installation or

service.

Haul out, launch, towing charges, removal and/or replacement of boat partitions or material because of boat

design for necessary access to the product, all related transportation charges and/or travel time, etc.

Reasonable access must be provided to the product for warranty service. Customer must deliver product to

an authorized dealer.

Additional service work requested by customer other than that necessary to satisfy the warranty obligation.

Содержание 15







































































Результаты поиска

Содержание 15

Отзывы:

Похожие инструкции для 15

Бренды по названию

Популярные бренды

Mercury 15, Руководство по обслуживанию

Результаты поиска

Содержание 15

Отзывы:

Похожие инструкции для 15

Бренды по названию

Популярные бренды