Mercury 100 EFI, Руководство пользователя

Страница: 32 / 87

FEATURES AND CONTROLS
26
Warning Horn
Function Sound Description
Sensor/Actuator out of
range
Single beep (engine
running)
May be a problem with one
of the engine functions.
Have your dealer check the
engine soon.
Continuous Engine Guardian System is
activated. Power limit will
restrict engine speed to
either idle or 55%,
depending on fault.
ENGINE GUARDIAN SYSTEM
The Engine Guardian System monitors the critical sensors on the engine for any early indications of problems.
The system will respond to a problem by emitting a continuous beep and/or reducing engine power in order to
provide engine protection.
If Guardian System has been activated, reduce throttle speed. The problem will need to be identified and
corrected, if possible. The system must be reset before the engine will operate at higher speeds. Moving the
throttle lever back to the idle position will reset the system.
SMARTCRAFT PRODUCT
A Mercury SmartCraft System instrument package can be purchased for this outboard. A few of the functions
the instrument package will display are engine RPM, coolant temperature, oil pressure, water pressure, battery
voltage, fuel consumption and engine operating hours.
The SmartCraft Instrument package will also aid in Engine Guardian diagnostics. The SmartCraft Instrument
package will display critical engine alarm data and potential problems.
Power Trim and Tilt
The outboard has a trim/tilt control called power trim. This enables the operator to easily adjust the position of
the outboard by pressing the trim switch. Moving the outboard in closer to the boat transom is called trimming
in or down. Moving the outboard further away from the boat transom is called trimming out or up. The term trim
generally refers to the adjustment of the outboard within the first 20° range of travel. This is the range used while
operating the boat on plane. The term tilt is generally used when referring to adjusting the outboard further up
out of the water. With the engine turned off and ignition switch turned on, the outboard can be tilted out of the
water. At low idle speed, the outboard can also be tilted up past the trim range to permit, for example, shallow
water operation.