Mercury 100 EFI, Руководство пользователя

Страница: 12 / 87

WARRANTY INFORMATION
6
Corrosion damage caused by stray electrical currents (on-shore power connections, nearby boats, submerged
metal) is not covered by this corrosion warranty and should be protected against by the use of a corrosion
protection system, such as the Mercury Precision Parts or Quicksilver MerCathode system and/or Galvanic
Isolator. Corrosion damage caused by improper application of copper base anti-fouling paints is also not covered
by this limited warranty. If anti-fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA) base anti-fouling paints
are recommended on Outboard and MerCruiser boating applications. In areas where TBTA base paints are
prohibited by law, copper base paints can be used on the hull and transom. Do not apply paint to the outboard
or MerCruiser product. In addition, care must be taken to avoid an electrical interconnection between the
warranted product and the paint. For MerCruiser product, an unpainted gap of at least 38 mm (1.5 in.) should
be left around the transom assembly. Refer to the Operation and Maintenance Manual for additional details.
For additional information regarding events and circumstances covered by this warranty, and those that are not,
see the Warranty Coverage section of the Operation and Maintenance Manual, incorporated by reference into
this warranty.
DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT
THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND
CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW FOR THE
DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY.
Warranty Coverage And Exclusions
The purpose of this section is to help eliminate some of the more common misunderstandings regarding warranty
coverage. The following information explains some of the types of services that are not covered by warranty.
The provisions set forth following have been incorporated by reference into the Three Year Limited Warranty
Against Corrosion Failure, the International Limited Outboard Warranty, and the United States and Canada
Limited Outboard Warranty.
Keep in mind that warranty covers repairs that are needed within the warranty period because of defects in
material and workmanship. Installation errors, accidents, normal wear, and a variety of other causes that affect
the product are not covered.
Warranty is limited to defects in material or workmanship, but only when the consumer sale is made in the country
to which distribution is authorized by us.
Should you have any questions concerning warranty coverage, contact your authorized dealer. They will be
pleased to answer any questions that you may have.
GENERAL EXCLUSIONS FROM WARRANTY
1. Minor adjustments and tune-ups, including checking, cleaning or adjusting spark plugs, ignition
components, carburetor settings, filters, belts, controls, and checking lubrication made in connection with
normal services.
2. Factory installed jet drive units - Specific parts excluded from the warranty are: The jet drive impeller and
jet drive liner damaged by impact or wear, and water damaged drive shaft bearings as a result of improper
maintenance.
3. Damage caused by neglect, lack of maintenance, accident, abnormal operation or improper installation
or service.
4. Haul out, launch, towing charges, removal and/or replacement of boat partitions or material because of
boat design for necessary access to the product, all related transportation charges and/or travel time,
etc. Reasonable access must be provided to the product for warranty service. Customer must deliver
product to an authorized dealer.