MerCruiser 8.1 H.O. Скачать руководство пользователя страница 47

Страница: 47 / 106

Section 3 - On the Water

90-899883273 MARCH 2008

Page 39

• Do not allow anyone to sit or ride on any part of the boat that was not intended for such

use. This includes the backs of seats, gunwales, transom, bow, decks, raised fishing

seats and any rotating fishing seat; anywhere that sudden unexpected acceleration,

sudden stopping, unexpected loss of boat control or sudden boat movement could

cause a person to be thrown overboard or into the boat. Ensure that all passengers

have a proper seat and are in it before any boat movement.

Never be under the influence of alcohol or drugs while boating (it is the law).

• They impair your judgment and greatly reduce your ability to react quickly.

Know your boating area and avoid hazardous locations.
Be alert.

• The operator of the boat is responsible by law to maintain a proper lookout by sight and

hearing. The operator must have an unobstructed view particularly to the front. No

passengers, load or fishing seats should block the operators view when the boat is

above idle or planing transition speed. Watch out for others, the water and your wake.

Never drive your boat directly behind a water skier in case the skier falls.

• As an example, your boat traveling at 40 km/h (25 MPH) will overtake a fallen skier who

was 61 m (200 ft.) in front of you in 5 seconds.

Watch fallen skiers.

• When using your boat for water skiing or similar activities, always keep a fallen or down

skier on the operator's side of the boat while returning to attend to the skier. The

operator should always have the down skier in sight and never back up to the skier or

anyone in the water.

Report accidents.

• Boat operators are required by law to file a Boating Accident Report with their state

boating law enforcement agency when their boat is involved in certain boating

accidents. A boating accident must be reported if 1) there is loss of life or probable loss

of life, 2) there is personal injury requiring medical treatment beyond first aid, 3) there

is damage to boats or other property where the damage value exceeds $500.00 or 4)

there is complete loss of the boat. Seek further assistance from local law enforcement.

Be Alert to Carbon Monoxide Poisoning

Carbon monoxide is present in the exhaust fumes of all internal combustion engines

including the outboards, sterndrives and inboard engines that propel boats, as well as the

generators that power various boat accessories. Carbon monoxide is a deadly gas that is

odorless, colorless and tasteless.
Early symptoms of carbon monoxide poisoning, which should not be confused with

seasickness or intoxication, include headache, dizziness, drowsiness and nausea.

WARNING

Carbon monoxide poisoning can lead to unconsciousness, brain damage, or death. Keep

the boat well ventilated while at rest or underway and avoid prolonged exposure to carbon

monoxide.

Good Ventilation

Ventilate the passenger area, open the side curtains or forward hatches to remove fumes.

Содержание 8.1 H.O.











































































































Результаты поиска

Содержание 8.1 H.O.

Отзывы:

Похожие инструкции для 8.1 H.O.

Бренды по названию

Популярные бренды

MerCruiser 8.1 H.O., Руководство пользователя

Результаты поиска

Содержание 8.1 H.O.

Отзывы:

Похожие инструкции для 8.1 H.O.

Бренды по названию

Популярные бренды