MerCruiser 8.1 H.O., Руководство пользователя

Страница: 39 / 106

Section 2 - Getting to Know Your Power Package
90-899883273 MARCH 2008 Page 31
SYNCHRONIZING DUAL HELMS PRIOR TO STATION TRANSFER
Pressing the station select button and holding it in allows the boat operator 10 seconds to
match up the control handle settings at the new station with the handle settings that are at
the old (to be inactive) station. If the handles are not matched, the neutral light will flash.
The light blinks faster as the handles are nearing match position. Once the light stays on
continuously, the handles are matched and the button can be released. Transfer process
is complete and the new station is now in control. If the button is held for over 10 seconds,
the station transfer is cancelled.
Zero Effort Features
a
b
17357
a - Shift ever b - Throttle lever
Shift Lever -
Shift functions are controlled by the movement of the shift lever. Shift into
reverse by moving the shift lever to its aft position. Shift into neutral by moving the shift
lever to its center position. Shift into forward by moving the shift lever to its forward position.
Throttle Lever -
Throttle functions are controlled by the movement of the throttle lever.
Increase the RPM by moving the throttle lever forward. Achieve Wide Open Throttle (WOT)
by placing the throttle lever in its full forward position. Decrease RPM by moving the throttle
lever back. Achieve minimum RPM (idle) by placing the throttle lever in its full aft position.
Electrical System Overload Protection
An electrical overload will either fail a fuse or trip a circuit breaker. You must find and repair
the source of the overload before replacing the fuse or resetting the circuit breaker.
NOTE: In an emergency, when you must operate the engine but cannot isolate the cause
for the high current draw, turn off or disconnect all accessories connected to the engine
and instrumentation wiring. Reset the circuit breaker. If the breaker remains open, you have
not eliminated the electrical overload and the electrical system requires further checks.
Contact your authorized Mercury MerCruiser dealer.
The circuit breaker provides protection for the engine wiring harness and the
instrumentation power lead. To test or reset the circuit breaker:
1. Remove the engine cover.
2. Push the red test button. A yellow lever appears if the circuit breaker is functioning
properly.