MerCruiser 350 Magnum MPI Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 76

background image

68

Q-Guard Product Protection Plan

United States and Canada Only

(Certain performance products,triple engine installations, and commercial applications are excluded)

The Mercury Marine Q-Guard Product Protection Plan provides coverage against unexpected mechanical and
electrical breakdowns that may occur beyond the standard limited warranty.

The optional Q-Guard Product Protection Plan is the only Factory Plan available for your engine.

Two, three or four - year term plans can be purchased up to 180 days after the original engine purchase date.

See your participating MerCruiser dealer for complete program details.

Owner Service Assistance

Local Repair Service

Always return your MerCruiser powered boat to your local Authorized Dealer, should the need for service arise.
Only he has the factory trained mechanics, knowledge, special tools and equipment and the genuine Quicksilver
parts and accessories* to properly service your engine should the need occur. He knows your engine best.

* Quicksilver parts and accessories are engineered and built by Mercury Marine, specifically for MerCruiser



stern

drives and inboards.

Service Away From Home

If you are away from your local dealer and the need arises for service, contact the nearest Authorized Dealer. Refer
to the Yellow Pages of the telephone directory. If, for any reason, you cannot obtain service, contact the nearest
Regional Service Center. Outside the United States and Canada, contact the nearest Marine Power International
Service Center.

Parts and Accessories Inquiries

All inquiries concerning Quicksilver replacement parts and accessories should be directed to your local Authorized
Dealer. The dealer has the necessary information to order parts and accessories for you should he not have them
in stock. Only Authorized Dealers can purchase genuine Quicksilver parts and accessories from the factory. Mer-
cury Marine does not sell to unauthorized dealers or retail customers. When inquiring on parts and accessories,
the dealer requires the motor model and serial number(s) to order the correct parts.

«
...
68
69
70
71
72
...
»

Содержание 350 Magnum MPI













































































Отзывы:

Нет отзывов

Похожие инструкции для 350 Magnum MPI

Бренд: Leroy-Somer Страницы: 8

Бренд: Parker Страницы: 20

Бренд: EBARA Страницы: 36

Бренд: Inel Страницы: 4

Бренд: Volvo Penta Страницы: 44

Бренд: Volvo Penta Страницы: 52

Бренд: Volvo Penta Страницы: 74

Бренд: Volvo Penta Страницы: 88

Бренд: YS Страницы: 2

Бренд: Just Motion Control Страницы: 21

Allen-Bradley C180ATZ

Бренд: Rockwell Automation Страницы: 24

B&W S50MC-C8-TII

Бренд: Man Страницы: 403

ARO AF064 Series

Бренд: Ingersoll-Rand Страницы: 8

Бренд: Ingersoll-Rand Страницы: 8

Бренд: Ingersoll-Rand Страницы: 8

Бренд: Yanmar Страницы: 6

Бренд: New Holland Страницы: 31

Бренд: Mitsubishi Heavy Industries Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды