MerCruiser 350 Magnum EFI GEN+ Alfa One Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 136

background image

113

International Owner Registration

OUTSIDE THE UNITED STATES AND CANADA

•

It is important that your selling dealer fills out the Warranty Regis-
tration Card completely and mails it to the distributor or Marine
Power Service Center responsible for administering the warranty
registration/claim program for your area.

•

The Warranty Registration Card identifies your name and ad-
dress, product model and serial number(s), date of sale, type of
use and the selling distributor’s/dealer’s code number, name and
address. The distributor/dealer also certifies that you are the origi-
nal purchaser and user of the product.

•

A copy of the Warranty Registration Card, designated as the “Pur-
chaser’s Copy”, MUST be given to you immediately after the card
has been completely filled out by the selling distributor/dealer.
This card represents your factory registration identification, and
should be retained by you for future use when required. Should
you ever require warranty service on this product, your dealer
may ask you for the Warranty Registration Card to verify date of
purchase and to use the information on the card to prepare the
warranty claim form (s).

•

In some countries, the Marine Power Service Center will issue
you a permanent (plastic) Warranty Registration Card within 30
days after receiving the “Factory Copy” of the Warranty Registra-
tion Card from your distributor/dealer. If you receive a plastic War-
ranty Registration Card, you may discard the “Purchaser’s Copy”
that you received from the distributor/dealer when you purchased
the product. Ask your distributor/dealer if this plastic card program
applies to you.

•

For further information concerning the Warranty Registration
Card and its relationship to Warranty Claim processing, refer to
the “International Warranty”. Refer to “Table of Contents”.

IMPORTANT: Registration lists must be maintained by the fac-
tory and dealer in some countries by law. It is our desire to have
ALL products registered at the factory should it ever be neces-
sary to contact you. Make sure your dealer/distributor fills out
the warranty registration card immediately and sends the facto-
ry copy to the Marine Power International Service Center for
your area.

«
...
113
114
115
116
117
...
»

Содержание 350 Magnum EFI GEN+ Alfa One









































































































































Отзывы:

Нет отзывов

Похожие инструкции для 350 Magnum EFI GEN+ Alfa One

Бренд: Barco Страницы: 54

Бренд: YOODA Страницы: 6

Бренд: Flux Страницы: 28

Char-Lynn H Series

Бренд: Eaton Страницы: 13

Бренд: YuanDong Страницы: 23

Бренд: BONFIGLIOLI Страницы: 16

Бренд: CIMCO Страницы: 24

Бренд: ULPOWER Страницы: 25

Бренд: Plettenberg Страницы: 26

Бренд: Dynamite Страницы: 28

GSX-R 1300 Turbo

Бренд: RPE Страницы: 19

Бренд: Exalto Страницы: 28

Бренд: Brother Страницы: 76

Бренд: Brother Страницы: 112

Бренд: Brother Страницы: 22

Бренд: Craftsman Страницы: 12

Бренд: Craftsman Страницы: 16

Бренд: Craftsman Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды