mcr OMEGA pro
Power and Control Panel
„MERCOR” S.A. –
The company reserves the right to modify and amend this document without notice.
3/28
1.
INTRODUCTION
___________________________________________________________
This Technical Manual is addressed to the operators of the mcr OMEGA pro modular Power and
Control Panels for operation of fire ventilation systems and the mcr OMEGA pro / mcr OMEGA proF Power
Supply Units for fire alarm systems and smoke and heat control systems. This document is intended to
provide guidelines on the application, design, commissioning and operation of these products. The
Technical Manual also provides the transport and warranty conditions for the products.
Read this Technical Manual thoroughly before installing and commissioning this
equipment. Failure to follow this Technical Manual may result in hazards to health
and/or property. The manufacturer shall not be liable for any consequences of non-
intended use or misuse of this equipment.
The mcr OMEGA pro Power and Control Panel complies with the requirements of the CNBOP-PIB National
Technical Assessment no.
CNBOP-PIB-KOT-2017/0011-1009 revision 3
and the essential requirements
of the European Union Directives and Regulations:
305/2011 (
CPR
) on marketing of construction products;
2014/35/UE (
LVD
) Low Voltage Directive;
2014/30/UE (
EMC
) Electromagnetic Compatibility Directive;
2011/65/UE (
ROHS
) on the restriction of the use of certain hazardous substances in electrical and
electronic equipment;
Regulation of the Minister of the Interior and Administration of 27 April 2010 amending the Regulation
on the specification of products used to assure public safety or the protection of health and life and
property, as well as rules for issuance of certificates of admittance for the use of those products
Compliance with these documents has been confirmed with applicable certificates granted by Polish
institute CNBOP-PIB for the mcr OMEGA pro Power and Control Panels and the following certificates
granted for the mcr OMEGA pro and mcr OMEGA proF Power Supply Units intended for fire alarm systems
and smoke and heat control systems:
Certificate of Admittance No.
2980/2017
– section 12.1, 12.2
(control and power supply);
Certificate of Constancy of Performance No.
1438-CPR-0569
;
National Certificate of Constancy of Performance No.
063-UWB-0048
;
Certificate of Admittance No.
2904/2017 - section 12.2
(power supply);
Certificate of Constancy of Performance No.
1438-CPR-0523
.
2.
INTENDED USE
____________________________________________________________
The mcr OMEGA pro Power and Control Panel for control of fire protection equipment operated in heat
and smoke control systems is intended to provide control, power supply and monitoring of the operation
of equipment installed in heat and smoke control systems, including the following::
jet fans;
smoke exhaust fans;
pressurization fans;
comfort air exhaust fans;
comfort air supply fans;
duct fans;
air transfer fans;
air pulse fans;
induction fans;
differentia pressure devices;
fire dampers;
smoke venting windows and dampers;
fire doors and gates;
smoke curtains;
comfort and fire ventilation dampers;
louvers;
warning and information display panels;
sensors, detectors, transducers, reed relays,
switches, call points etc..
