background image

mcr FID S/… c/P

 single-plane fire dampers 

„MERCOR” SA – 

The company reserves the right to modify and change the document

 

17/18 

 

230V±2% for electromagnetic release mechanism 

 

Inspections of the condition of the devices' body, taking the mechanical damage particularly into account. 

 

Checking whether there are no obstacles which could influence correct operation of the devices. 

To enable the performance of actions included in the range of service inspections, as well as service and warranty 
actions such as visual inspections or repairs it is mandatory that the user provides the physical access to the devices, 
e.g. by disassembly of the thermal insulation, disassembly of suspended ceilings, disassembly of other systems if 
they prevent free access to the device etc. 
In the case of devices installed in ducts, it is recommended to carry out the revisions, e.g. mcr KRW type. 
If devices are installed on the roof, ensure the possibility to enter the roof (ladder or lift). 
 
In the matters related with technical inspections, maintenance and the device service, contact the representatives of 
the Service Department of „Mercor” SA [email protected], tel. 058/ 341 42 45 internal 170 or fax 058/ 341 39 
85 from 8 AM to 8 PM (Mon - Fri). 
 
 
 
 
 

9. WARRANTY CONDITIONS 

 

1.  “MERCOR” SA grants 12 months of warranty for the equipment quality from the date of purchase, 

unless the sales contract states otherwise. 

2.  Submit each warranty claim to “MERCOR” SA in 7 days from the date of discovery of a warranty 

eligible defect 

3.  Submit warranty claims by calling at: tel. +48 58 341 42 45, by fax: +48 58 341 39 85, by e-mail: 

[email protected] or by traditional mail: “MERCOR” SA, ul. Grzegorza z Sanoka 2, 80-408 
Gdańsk, Poland. 

4.  If physical defects of equipment are found during the warranty period, “MERCOR” SA warrants and 

represents to remove them in shortest possible time from serving the written warranty claim with the 
proof of purchase or sales contract, subject to Item 10. 

5.  “MERCOR”  SA  has  the  right  to  extend  the  time  of  repair  if  the  defect  removal  is  complicated  or 

requires purchase of custom components or spare parts. 

6.  The warranty liability only covers all defects arising from causes present in the equipment at the date 

of sale. 

7.  Defects caused by improper operation or otherwise as listed in Item 10 herein, the buyer / warranty 

beneficiary will be charged with the costs of their removal. 

8.  Condition for rectifying defects is that the applicant makes the site/localisation where devices are 

installed available, in particular, ensuring: the lift in the case of devices mounted at a height above 
3m, free access to the rooms where the devices were installed and necessary revisions, dismantling 
thermal  insulation,  disassembling  suspended  ceilings,  disassembling  other  installations,  if  they 
prevent free access to the device. 

9.  If the device can not be repaired at the place of its installation, "MERCOR" SA reserves the necessity 

of its disassembly, possible delivery to the address indicated by "MERCOR" SA and re-assembly. 
The cost of this operation lies with the buyer / holder of the guarantee. 

10.  The warranty does not cover: 

  Any damage or failure of the equipment caused by improper operation, tampering, failure to 

conduct  periodic  technical  inspection  and/or  maintenance  established  in  the  Operating  and 
Maintenance Manual, section “SERVICING AND MAINTENANCE”. 

  Any damage beyond reasonable control of “MERCOR” SA, and specifically: caused by force 

majeure, such as torrential rainfall, flooding, hurricanes, inundation, lightning strike, power grid 
overvoltage,  explosion,  hail,  collision  with  aircraft,  fire,  avalanche,  landslide  and  indirect 
damage  due  to  those  causes.  Torrential  rainfall  is  understood  as  any  rainfall  with  the 
effectiveness factor of 4 or higher in accordance with the definition of the Polish Institute of 
Meteorology  and  Water  Management  -  National  Research  Institute  (IMGW-PIB).  If  the 
effectiveness  factor  value  specified  in  the  preceding  sentence  cannot  be  reasonably 
established, the actual condition and extent of damage shall be considered at the site of their 
origin  as  the  action  of  torrential  rain.  Hurricane  is  understood  as  any  wind  with  a  minimum 
speed of 17.5 m/s (and damage shall be recognised as caused by hurricanes if the effects of 
such weather phenomenon has been found in the direct vicinity of the damaged property). 

  Damage due to failure to immediately report any defect found. 

Содержание mcr FID S c/P Series



















Отзывы: