Merco 2TSW-2624, Руководство оператора

Страница: 4 / 8

OPERATION
#1 On/Off Switch controls lights.
#2 Controls the upper tubular heating element(s) and lower heating shelf.
#3 Illuminated Pilot Light indicates that tubular heating element(s) are on.
#4 Controls warming shelf.
#5 Illuminated Pilot Light indicates that the shelf is on.
The factory recommends setting the heat control knobs (2 & 4) between the numbers four (4) and six (6) on the control
panel depending on the ambient temperature.
CLEANING
DANGER!
Disconnect power supply before servicing or cleaning this unit. Safeguard power so it can-
not be accidentally restored. Failure to do so could result in serious injury.
EXTERIOR CLEANING
The stainless steel exterior surface of your unit may be cleaned with a soft, damp, soapy cloth or sponge. Be 1.
careful not to scratch the surface while cleaning. NOTE: Care should be taken to insure that water and/or cleaning
solutions do not access the control features located on the base/shelf.
Rinse with clean, damp, soft cloth or sponge. 2.
Alternate Method: Clean the exterior (Sides and top) of unit using a stainless steel cleaner/polish. NOTE: Do not use
stainless steel cleaner on the base/shelf as it is made of aluminum. For aluminum, simply use warm, soapy water. Follow
manufacturer’s instructions.
BLACK HARD-COAT ANODIZED SHELVES
1. Wash with a soft, damp, soapy cloth or sponge.
2. Rinse with soft, clean, damp cloth or sponge.