Pre drill
hole
30mm
screw
Pre drill
hole
30mm
screw
Step 12a
Fix the T Hinges (No.11) onto the doors
(No. 7 & 8) and door frame as shown with
7x30mm screws.
Fix the turn button (No.14) to one of the
boards using 1x30mm screws.
Note: If you have a large dog then you
may be more inclined to fit the larger
door at the bottom.
28x30mm screws.
4x30mm Black screws
Step 13a
Fix the door strip (No. 25) to the door
opposite the hinges and secure with
4x30mm screws.
4x30mm screws.
Please retain product label and instructions for future reference
P 12
Pre drill
hole
40mm
screw
30mm
screw
Step 15a
Attach the fascias to the front and rear
(No. 17) of the building with 4x40mm
screws per fascia.
Once in place, cut of the excess material
of the fascia with a hand saw.
Fix on the Finials (No. 12) on to the fascias
with 2x30mm screws
4x30mm screws.
16x40mm screws.
17
12
11
14
7
8
14
Step 14a
Cut the Felt (
No. 27, 28
) into 3 sheets and lay
onto the roof.
*Ensure there is approximately 50mm of
overhang around the building.
Fix into place using 100x felt tacks at
100mm intervals.
150x Felt tacks Felt Length 3140mm
*Ensure you overlap the felt by 100mm.
Felt tacks
28
27
25
*Note: Hinges to go on the side with the
shortest gap.
