P 5
Please retain product label and instructions for future reference
Step 10
Align the ridge bar between the
gables and secure to the central
uprights with 2x30mm screws
per bracket, as shown in the
illustration.
*Ensure the ridge bar is flush with
the top framing of the gable tops.
4x30mm Screws
Pre drill
hole
30mm
screw
Step 11
Place the roof support bars against
the ridge bar and the building, making
sure to align the roof support bars with
the upright framing on the door panel
and the back panel.
Secure the bars into the ridge bar with
1x50mm screw per bar, screwing
at an angle as shown in the illustration.
*Ensure to stagger the screws so as
not to hit one screw with another.
2x50mm Screws
Pre drill
hole
50mm
screw
Step 12
Fix the roof support blocks centrally
to the back and door panel upright
framing with 2x50mm screws per
block.
*Ensure the roof support bars meet
the blocks and are level with the
gables.
Secure the roof support bar to the
block using 1x50mm screw,
screwing down through the bar into
the block as shown in the illustration.
6x50mm Screws
Pre drill
hole
50mm
screw
Step 13
Secure the roof support brace
between the roof support bars
using 2x40mm screws.
2x40mm Screws
Pre drill
hole
40mm
screw
22
14
14
27
15
