Mercia Garden Products 03DTSHCR0707FGD2TW-V1, Общее руководство по инструкции

Страница: 8 / 10

Please retain product label and instructions for future reference
P 8
It is ESSENTIAL that you apply wood treat-
ment immediately after the building has
been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
Step 20
Parts needed - No. 21 QTY 2
No. 22 QTY 3
Fit the fascias
(No.21 and No.22)
to the building over the felt and
secure in place with 3x40mm
screws per cover trim.
Make sure the fascias at the back
of the building fit lower than the
roof height to allow water to run
off.
15x40mm Screws
40mm
screw
Pre drill
hole
17
17
25 25
Step 18
Parts needed - No. 17 QTY 2
- No. 25 QTY 2
Fit the Cover Trims (No.17) to the back of
the building onto the joins of the panels,
secure using 3x30mm screws per cover trim.
Fix the rear cover trims
(No.25) to the back
of the building, aligning with the edge of
the panel.
12x30mm Screws
30mm
screw Pre drill
hole
21
21
22
22
22