Mercia Garden Products 03DTSHAX0608FGD4MW-V1, Общее руководство по инструкции, Страница: 6 / 19

P 6
Please retain product label and instructions for future reference
Pre drill
hole
50mm
screw
IMPORTANT: Pre-drill before fixing screws.
Step 2
Parts Needed- No.2 QTY 1
- No.3 QTY 1
Place the Side panel
(No.2)
and the Back
Panel
(No.3)
onto the floor. Fix at the corner
using 3x50mm screws.
Do not secure the building to the floor
until the roof has been fitted.
Position the panels so there is equal spacing
between the floor and cladding on all sides.
The side panels should sit higher than
then Back panels
3x50mm Screws
2
3
a
a
a
a
Pre drill
hole
50mm
screw
3
IMPORTANT:
Pre-drill before fixing screws.
Step 3
Parts Needed- No.2 QTY 1
- No.3 QTY 1
Place the Side panel
(No.2)
and the Back
Panel (No.3) along side the standing panels.
Fix in an alternating pattern using 3x50mm
screws per panel.
Do not secure the building to the floor
until the roof has been fitted.
Position the panels so there is equal
spacing between the floor and cladding on
all sides.
6x50mm Screws
2
a
a
a
a
a
a
2ft EXTENSION PACK
Step 2a
Parts Needed- No.2 QTY 1
- No.3 QTY 1
- No.31 QTY 1
Place the Plain panel Extension
(No.31)
and
the Back Panel (No.3) onto the floor. Fix at the
corner using 3x50mm screws.
Place the Side panel (No.2) onto the floor and
fix along the side in alternating pattern using
3x50mm screws.
Do not secure the building to the floor
until the roof has been fitted.
Position the panels so there is equal
spacing between the floor and cladding on
all sides.
The side panels should sit higher than the
Back panels
6x50mm Screws
Pre drill
hole
50mm
screw
a
Pre drill
hole
50mm
screw
2ft EXTENSION PACK
Step 3a
Parts Needed- No.2 QTY 1
- No.3 QTY 1
- No.31 QTY 1
Place the Back Panel (No.3) and the Side panel
(No.2) onto the floor. Fix in an alternating
pattern using 3x50mm screws per panel
Place the Plain panel Extension (No.31) onto
the floor. Fix at the corner using 3x50mm
screws
Do not secure the building to the floor
until the roof has been fitted.
Position the panels so there is equal spacing
between the floor and cladding on all sides.
The side panels should sit higher than the Back
panels
9x50mm Screws
10x8 Summer
House
a
a
a
a
a
a
2
3
31
8x8 Summer
House
a
a
a
a
a
a
2
3
31
8x8 Summer
House
a
a
a
a
a
a
a
a
a
3
2
31
10x8 Summer
House
a
a
a
a
a
a
a
a
a
3
2
31
Please note: The side panels are all
interchangeable and can be positioned in
a variety of configurations. Decide which
works best before assembly
Please note: The side panels are all
interchangeable and can be positioned in
a variety of configurations. Decide which
works best before assembly