Step 8
Line the support block up with the gable
framing, use 40mm screws to fix.
Place the roof support bar on top of
the support block and using corner
braces fix with 30mm screws.
8 x 30mm screws
8 x 40mm screws
17
27
12
12
17
30mm
screw
Step 9
Fix a roof eave to each roof sheet using
30mm screws.
Position the roof sheets on the building
and fix to the roof support bar the rail
guard and the sides of the building using
30mm screws.
32 x 30mm screws
11
8
7
Step 10
Fix the support block between the
apex of the roof flush with the edge
of the roof sheets using 30mm
screws.
Fix the fascia block in the middle of
the the large roof sheet flush with
the edge using 30mm screws.
4 x 30mm screws
17
19
Step 11
Felt
tacks
80 x felt tacks
29
Cut felt into 3 sheets and lay onto roof
as shown in diagram ensuring there is
a 50mm overhang around the sides.
Fix using felt tacks at 100mm intervals
